A39 Integrated Stereo Amplifier

Integrated Amplifiers by ARCAM
A39 Integrated Stereo Amplifier
A39 Integrated Stereo Amplifier
< >
A39 Integrated Stereo Amplifier
A39 Integrated Stereo Amplifier

Was £1,595.00
now £1,249.00

A39 Integrated Stereo Amplifier

  • Integrated stereo amplifier with twin speaker outs
  • 120W Class G amplification, 20W in class A
  • On board PSU for rSeries products
  • Phono input configurable for line/MM
  • Low power 0.5W standby

Arcam’s A39 integrated amplifier represents a pinnacle of Arcam’s audio engineering. They set out to incorporate everything they have learnt over 40 years to deliver an amplifier that will set new standards and provide a sound quality for the best possible reproduction of your music.

With a class G amplifier, toroidal based power supply, acoustically damped chassis, paralleled transistor output stages and exceptionally low levels of distortion and noise, the A39 is capable of reproducing music with authority and detail.

The A39 offers a plentiful 120 watts per channel into 8 ohms and 240 into 4 ohms. It delivers 20 watts in pure class A mode while allowing for huge extra power reserves from their latest generation of Class G amplification that is both clever and efficient. During normal operation, distortion is measured in less than one part per million so that this massive power is delivered with total control and finesse.

Grahams recommend you partner this amplifier with:

Please contact us to arrange a demonstration. 

Technical Specifications:

Continuous power output per channel

  • Both channels, 8Ω, 20Hz—20kHz: 120W
  • Single channel, 4Ω, at 1kHz: 240W
  • Harmonic distortion, 80% power, 8Ω at 1kHz: 0.001%

Phono (MM) Input:

  • Input sensitivity at 1kHz: 5mV
  • Input impedance: 47kΩ + 270pF
  • Frequency response (ref. RIAA curve): 20Hz—20kHz ± 1dB
  • Signal/Noise ratio (Awtd) 50W, ref. 5mV input: 80dB
  • Overload margin, ref. 5mV at 1kHz: 20dB

Inputs:

  • Nominal sensitivity: 1V
  • Input impedance: 10kΩ
  • Maximum input: 4.6V
  • Frequency response: 20Hz—20kHz ± 0.2dB
  • Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB

Preamplifier output

  • Nominal output level: 900mV
  • Output impedance: 240Ω

Headphone output

  • Maximum output level into 600Ω: 4V
  • Output impedance: 1Ω
  • Load range: 16Ω—2kΩ

Accessory power output

  • 2.1mm DC connector: 6V, 1A

General

  • Mains voltage: 110–120V~ or 220–240V~
  • Power consumption (maximum): 1kW
  • Dimensions W x D x H (including feet): 433 x 425 x 100mm
  • Weight (net): 11.5kg
  • Weight (packed): 13.2kg

Supplied accessories

  • Mains lead
  • CR902 remote control
  • 2 x AAA batteries
  • Accessory power cable