A29 Integrated Stereo Amplifier

Integrated Amplifiers by ARCAM
A29 Integrated Stereo Amplifier
A29 Integrated Stereo Amplifier
< >
A29 Integrated Stereo Amplifier
A29 Integrated Stereo Amplifier

Was £999.00
now £849.00

A29 Integrated Stereo Amplifier

  • Integrated stereo amplifier
  • 80W Class G amplification
  • On board PSU for rSeries products
  • Phono input configurable for line/MM
  • Low power 0.5W standby

Drawing on the many years of amplifier design experience at Arcam, the A29 employs the finest design with the best quality components and engineering to produce a product that will give many years of musical pleasure and reliable service.

With a class G amplifier, toroidal based power supply, acoustically damped chassis, complementary transistor output stages and exceptionally low levels of distortion and noise the A29 is capable of reproducing music with all its original authority and detail.

The A29 provides a massive 80 watts per channel into 8 ohms and 175 watts into 4 ohms, allowing for huge extra power reserves from their latest generation class G topology that is both clever and efficient. During normal operation, distortion is measured in less than one part per million so that this massive power is deliver with total control and finesse.

Grahams recommend you partner this amplifier with:

Please contact us to arrange a demonstration. 

Technical Specifications:

Continuous power output per channel:

  • Both channels, 8Ω, 20Hz—20kHz: 80W
  • Single channel, 4Ω, at 1kHz: 175W
  • Harmonic distortion, 80% power, 8Ω at 1kHz: 0.003%

Phono (MM) Input:

  • Input sensitivity at 1kHz: 5mV
  • Input impedance: 47kΩ + 100pF
  • Frequency response (ref. RIAA curve): 20Hz—20kHz ± 1dB
  • Signal/Noise ratio (Awtd) 50W, ref. 5mV input: 80dB
  • Overload margin, ref. 5mV at 1kHz: 23dB

Inputs:

  • Nominal sensitivity: 1V
  • Input impedance: 10kΩ
  • Maximum input: 4.6V
  • Frequency response: 20Hz—20kHz ± 0.2dB
  • Signal/noise ratio (Awtd) 50W, ref. 1V input: 105dB

Preamplifier output

  • Nominal output level: 735mV
  • Output impedance: 230Ω

Headphone output

  • Maximum output level into 600Ω: 5V
  • Output impedance: 1Ω
  • Load range: 16Ω—2kΩ

Accessory power output

  • 2.1mm DC connector: 6V, 500mA

General

  • Mains voltage: 110–120V~ or 220–240V~
  • Power consumption (maximum): 1kW
  • Dimensions W x D x H (including feet): 433 x 275 x 85mm
  • Weight (net): 9.2kg
  • Weight (packed): 10.7kg

Supplied accessories

  • Mains lead
  • CR902 remote control
  • 2 x AAA batteries
  • Accessory power cable